TRINITY DECAPÈ
BRUSHED OAK
- Prepare YS---M009/----- with 5% addition of EY---M690/--C01
- Apply 60 g/m² by spray
- Wait at least 8 hours
- Apply YS---C909/---AG by spray
- Sand manually with 320 grit sandpaper to bring out the black colour
TRINITY DECAPÈ
BRUSHED OAK
- Prepare YS---M009/----- with 5% addition of EY---M690/--C01
- Apply 60 g/m² by spray
- Wait at least 8 hours
- Prepare YS---C909/TIZIANO by stirring
- 1/3 of YS---C909/---AG
- 1/3 of YS---C909/---AU
- 1/3 of YS---C909/---CU
- Apply YS---C909/TIZIANO by spray
- Apply YS---C909/---AG by spray
- Sand manually with 320 grit sandpaper to bring out the black colour
TRINITY DECAPÈ
BRUSHED OAK
- Prepare YS---M009/----- with 5% addition EY---M690/--C01
- Apply 60 g/m² by spray
- Wait at least 8 hours
- Prepare YS---C909/MICHELANGELO by stirring
- 1/3 of YS---C909/---AG
- 2/3 of YS---C909/---CU
- Apply YS---C909/MICHELANGELO by spray
- Apply YS---C909/---CU by spray
- Sand manually with 320 grit sandpaper to bring out the black colour
PURE TRINITY
BRUSHED OAK
- Prepare YS---C909/---AG with 3% addition of EY---M470/--T01
- Apply two coats of 60 g/m² each, with 2 hours drying time between coats
PURE TRINITY
BRUSHED OAK
- Prepare YS---C909/TIZIANO by stirring
- 1/3 of YS---C909/---AG
- 1/3 of YS---C909/---AU
- 1/3 of YS---C909/---CU
- Apply two coats of 60 g/m² each, with 2 hours drying time between coats
PURE TRINITY
BRUSHED OAK
- Prepare YS---C909/MICHELANGELO by stirring
- 1/3 of YS---C909/---AG
- 2/3 of YS---C909/---CU
- Apply two coats of 60 g/m² each, with 2 hours drying time between coats
PURE TRINITY
BRUSHED OAK
- Apply two coats of 60 g/m² each of YS---C909/---AG, with 2 hours drying time between coats
PURE TRINITY
BRUSHED OAK
- Prepare YS---C909/CARAVAGGIO by stirring
- 2/3 of YS---C909/---AG
- 1/3 of YS---C909/---AU
- Apply two coats of 60 g/m² each, with 2 hours drying time between coats
PURE TRINITY
BRUSHED OAK
- Prepare YS---C909/TINTORETTO by stirring
- 2/3 of YS---C909/---AG
- 1/3 of YS---C909/---CU
- Apply two coats of 60 g/m² each, with 2 hours drying time between coats
TRINITY ON BLACK ORANGE PEEL
MDF
- Apply two coats of black primer FL---M720/--C01
- Apply YL---M560/--C01 as per TDS
- Wait 24 h
- Prepare YS---C909/CARAVAGGIO by stirring
- 2/3 of YS---C909/---AG
- 1/3 of YS---C909/---AU
- Apply YS---C909/---AG by spray
- Apply YS---C909/CARAVAGGIO by spray, then proceed with wiping
TRINITY ON BLACK ORANGE PEEL
MDF
- Apply two coats of black primer FL---M720/--C01
- Apply YL---M560/--C01 as per TDS
- Wait 24 h
- Prepare YS---C909/TIZIANO by stirring
- 1/3 of YS---C909/---AG
- 1/3 of YS---C909/---AU
- 1/3 of YS---C909/---CU
- Apply YS---C909/---AG by spray
- Apply YS---C909/TIZIANO by spray, then proceed with wiping
TRINITY ON BLACK ORANGE PEEL
MDF
- Apply two coats of black primer FL---M720/--C01
- Apply YL---M560/--C01 as per TDS
- Wait 24 h
- Prepare YS---C909/MICHELANGELO by stirring
- 1/3 of YS---C909/---AG
- 2/3 of YS---C909/---CU
- Apply YS---C909/MICHELANGELO by spray
- Apply YS---C909/---CU by spray, then proceed with wiping
PLASTI:CO ALU EFFECTS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUPLAST effect
- 80% BASE stirring: 97% of JW---M019/--ALU and 3% of EW---M400/AL928
- 20% TM---M005/--T01
- Catalyse the mixture at 10% with FC---M070/-----
- Dilute the mixture at 40% with DF---M005/-----
- Apply one coat of 120 g/m²
PLASTI:CO ALU EFFECTS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUPLAST effect
- 94% of JW---M019/--ALU
- 3% of EW---M400/AL929
- 3% of EW---M400/AL930
- Catalyse the mixture at 10% with FC---M070/-----
- Dilute the mixture at 40% with DF---M005
- Apply one coat of 120 g/m²
PLASTI:CO ALU EFFECTS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUPLAST effect
- 100% base stirring: 97% of JW---M019/--ALU and 3% of EW---M400/AL930
- 5% of TM---M006/T08
- Catalyse the mixture at 10% with FC---M070/-----
- Dilute the mixture at 40% with DF---M005/-----
- Apply one coat of 120 g/m²
PLASTI:CO ALU EFFECTS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUPLAST effect
- 93% base stirring: 97% of JW---M019/--ALU and 3% of EW---M400/AL928
- 7% of TM---M005/--T01
- Catalyse the mixture at 10% with FC---M070/-----
- Dilute the mixture at 40% with DF---M005/-----
- Apply one coat of 120 g/m²
PLASTI:CO ALU EFFECTS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUPLAST effect
- 97% of JW---M019/--ALU
- 3% of EW---M400/AL929
- Catalyse the mixture at 10% with FC---M070/-----
- Dilute the mixture at 40% with DF---M005
- Apply one coat of 120 g/m²
PLASTI:CO ALU EFFECTS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUPLAST effect
- 99% of JW---M019/--ALU
- 1% of EW---M400/AL930
- Catalyse the mixture at 10% with FC---M070/-----
- Dilute the mixture at 40% with DF---M005
- Apply one coat of 120 g/m²
WB SCRATCHED ALU
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUACQUA SILVER effect
- 94% of YO---M587/-----
- 3% of EY---M494/--F95
- 1% of EW---M400/AL928
- Catalyse ALUACQUA SILVER mixture at 5% with YC---M403/-----
- Apply a single coat of 100 g/m²
- The day after create vertical scratches with scotch brite
- Apply YO-50M838/----- catalysed at 10% with YC---M402/-----
- Apply one coat of 70-80 g/m²
WB SCRATCHED ALU
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUACQUA ANTIQUE GOLD effect
- 94% of YO---M587/-----
- 3% of EY---M494/--F95
- 1% of EW---M400/AL929
- 2% of TY---M003/T19
- Catalyse ALUACQUA ANTIQUE GOLD mixture at 5% with YC---M403/-----
- Apply a single coat of 100 g/m²
- The day after create vertical scratches with scotch brite
- Apply YO-50M838/----- catalysed at 10% with YC---M402/-----
- Apply one coat of 70-80 g/m²
WB SCRATCHED ALU
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUACQUA ANTIQUE COPPER effect
- 94% YO---M587/-----
- 3% of EY---M494/--F95
- 1% of EW---M400/AL930
- 2% of TY---M003/T19
- Catalyse ALUACQUA ANTIQUE COPPER mixture at 5% with YC---M403/-----
- Apply a single coat of 100 g/m²
- The day after create vertical scratches with scotch brite
- Apply YO-50M838/----- catalysed at 10% with YC---M402/-----
- Apply one coat of 70-80 g/m²
WB SCRATCHED ALU
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUACQUA TITANIUM effect
- 90% of YO---M587/-----
- 3% of EY---M494/--F95
- 1% of EW---M400/AL928
- 4% of TY---M003/--T01
- 2% of TY---M003/T19
- Catalyse ALUACQUA TITANIUM mixture at 5% with YC---M403/-----
- Apply a single coat of 100 g/m²
- The day after create vertical scratches with scotch brite
- Apply YO-50M838/----- catalysed at 10% with YC---M402/-----
- Apply one coat of 70-80 g/m²
WB SCRATCHED ALU
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUACQUA ANTIQUE BRONZE effect
- 92% of YO---M587/-----
- 3% of EY---M494/--F95
- 1% of EW---M400/AL928
- 1% of EW---M400/AL929
- 1% of EW---M400/AL930
- 2% of TY---M003/T19
- Catalyse ALUACQUA ANTIQUE BRONZE mixture at 5% with YC---M403/-----
- Apply a single coat of 100 g/m²
- The day after create vertical scratches with scotch brite
- Apply YO-50M838/----- catalysed at 10% with YC---M402/-----
- Apply one coat of 70-80 g/m²
WB SCRATCHED ALU
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare ALUACQUA DARK ANTIQUE COPPER effect
- 92% of YO---M587/-----
- 3% of EY---M494/--F95
- 3% of EW---M400/AL929
- 2% of TY---M003/T19
- Catalyse ALUACQUA DARK ANTIQUE COPPER mixture at 5% with YC---M403/-----
- Apply a single coat of 100 g/m²
- The day after create vertical scratches with scotch brite
- Apply YO-50M838/----- catalysed at 10% with YC---M402/-----
- Apply one coat of 70-80 g/m²
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 8
- 91.5% of an equal mixture of DF---M005/----- and DP---M040/-----
- 2.5% of MP-ALU540S
- 1% of TM---M007/T03
- 5% of TM---M007/T01
- Apply CHROME FORMULA NO. 8 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted with 80% of DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 2
- 95.6% of an equal mixture of DF---M005/----- and DP---M040/-----
- 2.7% of MP-ALU540S
- 0.5% of MP-ALU542S
- 0.6% of TM---M007/T03
- 0.6% of TM---M007/T01
- Apply CHROME FORMULA NO. 2 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 3
- 94% of an equal mixture of DF---M005/----- and DP---M040/-----
- 2% of MP-ALU102S
- 1% of MP-ALU542S
- 1% of TM---M500/T08
- 2% of TM---M007/T01
- Apply CHROME FORMULA NO. 3 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 6
- 94.5% of an equal mixture of DF---M005/----- and DP---M040/-----
- 2.5% of MP-ALU540S
- 2% of TM---M007/T03
- 1% of TM---M007/T01
- Apply CHROME FORMULA NO. 6 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 9
- 96% of an equal mixture of DF---M005/----- and DP---M040/-----
- 1.5% of MP-ALU102S
- 1.5% of MP-ALU542S
- 0.5% of TM---M500/T08
- 0.5% of TM---M007/T03
- Apply CHROME FORMULA NO. 9 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 1
- 96.4% of an equal mixture of DF---M005/----- and DP---M040/-----
- 2.5% of MP-ALU102S
- 0.5% of MP-ALU542S
- 0.3% of TM---M007/T03
- 0.3% of TM---M007/T01
- Apply CHROME FORMULA NO. 1 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 4
- 96% of an equal mixture of DF---M005/----- and DP---M040/-----
- 2.5% of MP-ALU540S
- 0.5% of MP-ALU542S
- 1% of TM---M007/T01
- Apply CHROME FORMULA NO. 4 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 7
- 97% of an equal mixture of DF---M005/----- and DP---M040/-----
- 1% of MP-ALU540S
- 2% of MP-ALU542S
- Apply CHROME FORMULA NO. 7 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
NEW PIGMENTED CHROMES
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Catalyse FB---M596/--C01 at 80% with FC---M640/----- and dilute it at 20% with DF---M600/-----
- Apply one coat of 150 g/m²
- Wait 24 h
- Prepare CHROME FORMULA NO. 5
- 96% of an equal mixture of DF---M005/----- and DP---M040/-----
- 1% of MP-ALU102S
- 3% of MP-ALU542S
- Apply CHROME FORMULA NO. 5 by very closed spray gun 10 times with crossed movement
- At the end, apply a coat of 80-100 g/m² of JO-25M073/----- catalysed at 10% with FC---M073/----- and diluted at 80% with DF---M005/-----
MOTHER-OF-PEARLS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare MOTHER-OF-PEARL LEAD
- 83% of JW---M070/--C02
- 10% of JB---M671/-----
- 2% of MP-ALU290S
- 5% EF---M090/--NRO
- Catalyse MOTHER-OF-PEARL LEAD at 30% with FC---M070/----- and dilute it at 60% with DF---M003/-----
- Apply 150 g/m² of MOTHER-OF-PEARL LEAD
- The following day apply 150 g/m² of JB---M671/----- polish catalysed at 100% with FC---M640/-----
MOTHER-OF-PEARLS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare MOTHER-OF-PEARL GOLD
- 86% of JW---M070/--C02
- 10% of JB---M671/-----
- 4% of MP-ALU290S
- Catalyse MOTHER-OF-PEARL GOLD at 30% with FC---M070/----- and dilute it at 60% with DF---M003/-----
- Apply 150 g/m² of MOTHER-OF-PEARL GOLD
- The following day apply 150 g/m² of JB---M671/----- polish catalysed at 100% with FC---M640/-----
MOTHER-OF-PEARLS
MDF
- Apply two coats of black primer FL---M720/--C01
- Sand manually with 320 grit sandpaper
- Prepare MOTHER-OF-PEARL COPPER as follows
- 84% of JW---M070/--C02
- 10% of JB---M671/-----
- 4% of MP-PRL283S
- 1% of TM---M500/T01
- 1% of TM---M500/T52
- Catalyse MOTHER-OF-PEARL COPPER at 30% with FC---M070/----- and dilute it 60% with DF---M003/-----
- Apply 150 g/m² of MOTHER-OF-PEARL COPPER
- The following day apply 150 g/m² of JB---M671/----- polish catalysed at 100% with FC---M640/-----
LIQUID METALS
BRUSHED OAK
- Prepare LIQUID METAL C40 as follows
- 100 of JW---M379/--NTR (component A)
- 100 of EF---M370/--C40 (component B)
- Catalyse LIQUID METAL C40 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply two coats of 300 g/m² of the resulting mixture, with 2 h drying time between coats
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Prepare the top coat JB---M670/-----: catalyse it at 50% with FC---M070/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
BRUSHED OAK
- Prepare LIQUID METAL C46 as follows:
- 100 of JW---M379/--NTR (component A)
- 100 of EF---M370/--C46 (component B)
- Catalyse LIQUID METAL C46 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply two coats of 300 g/m² of the resulting mixture, with 2 h drying time between coats
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Prepare the top coat JB---M670/-----: catalyse it at 50% with FC---M070/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
BRUSHED OAK
- Prepare LIQUID METAL C40/C66 as follows:
- 100 of JW---M379/--NTR (component A)
- 50 of EF---M370/--C40 (component B)
- 50 of EF---M370/--C66 (component B)
- Catalyse LIQUID METAL C40/C66 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply two coats of 300 g/m² of the resulting mixture, with 2 h drying time between coats
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Prepare the top coat JB---M670/-----: catalyse it at 50% with FC---M070/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
BRUSHED OAK
- Prepare LIQUID METAL C40/C75 as follows:
- 100 of JW---M379/--NTR (component A)
- 50 of EF---M370/--C40 (component B)
- 50 of EF---M370/--C75 (component B)
- Catalyse LIQUID METAL C40/C75 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply two coats of 300 g/m² of the resulting mixture, with 2 h drying time between coats
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Prepare the top coat JB---M670/-----: catalyse it at 50% with FC---M070/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
BRUSHED OAK
- Prepare LIQUID METAL C53 as follows:
- 100 of JW---M379/--NTR (component A)
- 100 of EF---M370/--C53 (component B)
- Catalyse LIQUID METAL C53 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply two coats of 300 g/m² of the resulting mixture, with 2 h drying time between coats
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Prepare the top coat JB---M670/-----: catalyse it at 50% with FC---M070/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
BRUSHED OAK
- Prepare LIQUID METAL C66 as follows:
- 100 of JW---M379/--NTR (component A)
- 100 of EF---M370/--C66 (component B)
- Catalyse LIQUID METAL C66 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply two coats of 300 g/m² of the resulting mixture, with 4 h drying time between coats
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Prepare the top coat JB---M670/-----: catalyse it at 50% with FC---M070/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
MDF
- Prepare LIQUID METAL C40/C75 as follows:
- 100 of JW---M379/--NTR (component A)
- 50 of EF---M370/--C40 (component B)
- 50 of EF---M370/--C75 (component B)
- Catalyse LIQUID METAL C40/C75 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply a coat of 120 g/m² of the resulting mixture and wait 2 h
- Apply a second coat of 400 g/m² of the resulting mixture, then proceed with roller reproducing the crocodile effect
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Catalyse finish JO-25M073/----- at 10% with FC---M073/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
MDF
- Prepare LIQUID METAL C53 as follows:
- 100 of JW---M379/--NTR (component A)
- 100 of EF---M370/--C53 (component B)
- Catalyse LIQUID METAL C53 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply a coat of 120 g/m² of the resulting mixture and wait 2 h
- Apply a second coat of 400 g/m² of the resulting mixture, then proceed with roller reproducing the crocodile effect
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Catalyse finish JO-25M073/----- at 10% with FC---M073/----- and dilute it at 60% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
LIQUID METALS
MDF
- Prepare LIQUID METAL C66 as follows:
- 100 of JW---M379/--NTR (component A)
- 100 of EF---M370/--C66 (component B)
- Catalyse LIQUID METAL C66 at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on total components (A+B)
- Apply a coat of 120 g/m² of the resulting mixture and wait 2 h
- Apply a second coat of 400 g/m² of the resulting mixture, then proceed with roller reproducing the crocodile effect
- The following day sand using the following grits in sequence: 320-400-600-800-100-2000-3000
- Catalyse finish JO-25M073/----- at 10% with FC---M073/----- and dilute it at 60% with DF---M005/-----
- Apply a coat of 120 g/m² of the resulting mixture
OXIDISED LIQUID METALS
MDF
- Apply FI---M199/--NTR
- Sand with 320 grit sandpaper
- Prepare CORTEN EFFECT as follows:
- 100 of JW---M379/--NTR (component A)
- 100 of MP-ADT021 (component B)
- Catalyse CORTEN EFFECT at 10% on component A with FC---M070/----- and dilute it at 10% with DF---M005/----- on the total mixture (A+B)
- Apply 400 g/m² of the resulting CORTEN EFFECT mixture
- Apply 80 g/m² of AY---M583/-----
- After 24 h apply 80 g/m² of MP-CPH820
- Catalyse finish JO-10M070/----- at 10% with FC---M070/----- and dilute it at 60% with DF---M005/-----
- Apply a coat of 100 g/m² of the resulting mixture
OXIDISED LIQUID METALS
MDF
- Apply FI---M199/--NTR
- Sand with 320 grit sandpaper
- Apply a coat of 150 g/m² of YW---M524/--C96 diluted at 10% with water
- The day after apply drops under low pressure of AY---C524/-----
- Wait 8 h
- Catalyse finish YS---M009/----- at 5% with YC---M403/-----
- Apply the finish in a coat of 90 g/m²
OXIDISED LIQUID METALS
MDF
- Apply FI---M199/--NTR
- Sand with 320 grit sandpaper
- Prepare LIQUID METAL C66 as follows:
- 100 of JW---M379/--NTR (component A)
- 100 of EF---M370/--C66 (component B)
- Catalyse LIQUID METAL C66 at 10% of component A with FC---M070/----- and dilute it 10% with DF---M005/----- on the total (A+B)
- Apply two coats of 300 g/m² of the resulting mixture, with 2 h drying time between coats
- The following day, sand in sequence with grits 320-400-600
- Apply drops under low pressure of AY---C524/-----
- The following day, remove the excess by means of a dampened wipe
- Catalyse finish JO-10M072/----- at 10% with FC---M070/----- and dilute it at 80% with DF---M005/-----
- Apply a coat of 100 g/m² of the resulting mixture
CONCRETE EFFECT
MDF
- Apply FI---M199/--NTR
- Sand with 320 grit sandpaper
- Apply a coat of 100 g/m² of YL---C254/NCS S 3005 Y 50 R tinting system to colour the substrate
- Wait 3 h and apply a second coat of 150 g/m²
- Model the substrate with the wood effect roller
- After 8 h pass the graphite
- Catalyse finish YO-03G445/--NTR at 15% with YC---M402/-----
- Apply a coat of 100 g/m² of the finish
CONCRETE EFFECT
MDF
- Apply FI---M199/--NTR
- Sand with 320 grit sandpaper
- Apply a coat of 100 g/m² of YL---C254/NCS S 4005 Y 50 R tinting system to colour the substrate
- Wait 3 h and apply a second coat of 150 g/m²
- Model the substrate with the wood effect roller
- After 8 h pass the graphite
- Catalyse finish YO-03G445/--NTR at 15% with YC---M402/-----
- Apply a coat of 100 g/m² of the finish
CONCRETE EFFECT
MDF
- Apply FI---M199/--NTR
- Sand with 320 grit sandpaper
- Apply a coat of 100 g/m² of YL---C254/NCS S 6005 Y 50 R tinting system to colour the substrate
- Wait 3 h and apply a second coat of 150 g/m²
- Model the substrate with the wood effect roller
- After 8 h pass the graphite
- Catalyse finish YO-03G445/--NTR at 15% with YC---M402/-----
- Apply a coat of 100 g/m² of the finish
CRAQUELET
BRUSHED OAK
- Apply a coat of 100 g/m² of JL---M073/----- catalysed at 10% with FC---M073/----- and diluted at 40% with DF---M005/-----
- Dilute NL---M001 NCS 3005 G 20Y tinting system at 50% with DN---M020/-----
- 8 h after the first coat, apply a coat of 120 g/m² of the coloured NL mixture
- Dilute JW---M010 NCS 3005 G 20Y tinting system (prepared using a double quantity of EF---M090/--C01) at 50% with DN---M020/----
- 2.5 h after the second coat apply a coat of 130 g/m² of the coloured JW mixture
- Wait the next day and apply a coat of 120 g/m² of JO-10M070/----- catalysed at 10% with FC---M070/----- and diluted at 40% with DF---M005/-----
CRAQUELET
BRUSHED OAK
- Apply a coat of 100 g/m² of JL---M073/----- catalysed at 10% with FC---M073/----- and diluted at 40% with DF---M005/-----
- Dilute NL---M001 NCS 4005 G 20Y tinting system at 50% with DN---M020/-----
- 8 h after the first coat, apply a coat of 120 g/m² of the coloured NL mixture
- Dilute JW---M010 NCS 4005 G 20Y tinting system (prepared using a double quantity of EF---M090/--C01) at 50% with DN---M020/----
- 2.5 h after the second coat apply a coat of 130 g/m² of the coloured JW mixture
- Wait the next day and apply a coat of 120 g/m² of JO-10M070/----- catalysed at 10% with FC---M070/----- and diluted at 40% with DF---M005/-----
CRAQUELET
BRUSHED OAK
- Apply a coat of 100 g/m² of JL---M073/----- catalysed at 10% with FC---M073/----- and diluted at 40% with DF---M005/-----
- Dilute NL---M001 NCS 6005 G 20Y tinting system at 50% with DN---M020/-----
- 8 h after the first coat, apply a coat of 120 g/m² of the coloured NL mixture
- Dilute JW---M010 NCS 6005 G 20Y tinting system (prepared using a double quantity of EF---M090/--C01) at 50% with DN---M020/----
- 2.5 h after the second coat apply a coat of 130 g/m² of the coloured JW mixture
- Wait the next day and apply a coat of 120 g/m² of JO-10M070/----- catalysed at 10% with FC---M070/----- and diluted at 40% with DF---M005/-----
STREAMERS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 3005 R 80B tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, apply the following mixture until the desired effect is obtained
- 100 of NF---M444/--NTR
- 5 of EY---M690/--C02
- 10 of DN---M020/-----
- Apply 150 g/m² of JO-10M070/----- catalysed at 10% with FC---M070/----- and diluted at 40% with DF---M005/-----
STREAMERS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 5005 R 80B tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, apply the following mixture until the desired effect is obtained
- 100 of NF---M444/--NTR
- 5 of EY---M690/--C02
- 10 of DN---M020/-----
- Apply 150 g/m² of JO-10M070/----- catalysed at 10% with FC---M070/----- and diluted at 40% with DF---M005/-----
STREAMERS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 8005 R 80B tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, apply the following mixture until the desired effect is obtained
- 100 of NF---M444/--NTR
- 5 of EY---M690/--C02
- 10 of DN---M020/-----
- Apply 150 g/m² of JO-10M070/----- catalysed at 10% with FC---M070/----- and diluted at 40% with DF---M005/-----
CERAMIC EFFECT
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 3000N tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, following the same catalysis and dilution, prepare with the tinting system
- FO-10M090/ NCS 5000N
- FO-10M090/ NCS 8000N
- Apply them by spray at low pressure (0.8 BAR) one after the other until the desired effect is obtained
CERAMIC EFFECT
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 5000N tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, following the same catalysis and dilution, prepare with the tinting system
- FO-10M090/ NCS 3000N
- FO-10M090/ NCS 8000N
- Apply them by spray at low pressure (0.8 BAR) one after the other until the desired effect is obtained
CERAMIC EFFECT
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 8000N tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, following the same catalysis and dilution, prepare with the tinting system
- FO-10M090/ NCS 5000N
- FO-10M090/ NCS 3000N
- Apply them by spray at low pressure (0.8 BAR) one after the other until the desired effect is obtained
MARBLE
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 8000N tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, prepare ELBA shade as follows
- 100 of DT---M070/-----
- 0.30 of EW---M400/AL930
- 0.15 of EW---M400/AL928
- 0.15 of EW---M400/AL929
- Apply a very light coat, then apply at low pressure DT---M070/----- until the desired effect is obtained
- Apply 150 g/m² of JB---M671/----- fixing finish, 100% catalysed with FC---M640/-----
MARBLE
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 NCS 6005 Y 20R tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after, prepare ASINARA shade as follows
- 100 of DT---M070/-----
- 0.15 of EW---M400/AL930
- 0.15 of EW---M400/AL928
- 0.15 of EW---M400/AL929
- Apply a very light coat, then apply at low pressure DT---M070/----- until the desired effect is obtained
- Apply 150 g/m² of JB---M671/----- fixing finish, 100% catalysed with FC---M640/-----
MARBLE
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Catalyse FO-10M090 RAL 9003 tinting system at 50% with FC---M021/----- and dilute it at 20% with DF---M005/-----
- Apply a coat of 130 g/m² of the above product
- The day after prepare PANAREA shade as follows
- 100 of DT---M070/-----
- 0.075 of EW---M400/AL930
- 0.30 of EW---M400/AL928
- 0.075 of EW---M400/AL929
- Apply a very light coat, then apply at low pressure DT---M070/----- until the desired effect is obtained
- Apply 150 g/m² of JB---M671/----- fixing finish, 100% catalysed with FC---M640/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/XSTAL catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/BLACK catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/DARK catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/BRONZ catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/IRIDE catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/SWARO catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/G5909 catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----
PLASTI:CO SPECIAL EFFECTS
MDF
- Apply two coats of 150 g/m² of black primer FL---M720/--C01
- Sand with 320 grit sandpaper
- Apply a coat of 120 g/m² of JW---M019/G0904 catalysed at 10% with FC---M070 and diluted at 40% with DF---M005/-----